Scotland by OPI Fall 2019 Collection: Inspired by the unique culture, majestic landscapes, and historical cities of Scotland, OPI offers twelve new permanent trendsetting shades. The collection’s palette includes moody blue hues, autumn tones, and luxurious purples such as our hero shade, “Good Girls Gone Plaid”. The Scotland Collection is matched across three franchises (Nail Lacquer, Infinite Shine, and GelColor) and for the first time six shades are matched in Powder Perfection.
Rub-A-Pub-Pub - Gelcolor
SKU#:
CAN-008832
UPC#:
3614228129176
Offers Available
Not available for standard shipping
Shipping
Pickup
2-hr Delivery
CAN-008832
Scotland by OPI Fall 2019 Collection: Inspired by the unique culture, majestic landscapes, and historical cities of Scotland, OPI offers twelve new permanent trendsetting shades. The collection’s palette includes moody blue hues, autumn tones, and luxurious purples such as our hero shade, “Good Girls Gone Plaid”. The Scotland Collection is matched across three franchises (Nail Lacquer, Infinite Shine, and GelColor) and for the first time six shades are matched in Powder Perfection.
Step 1: Shake OPI GelColor Base Coat vigorously for 1 minute to thoroughly mix. Wipe excess Base Coat from the stem and brush when removing from the bottle.
Step 2: Apply a thin coat down the center of the nail and then to each side leaving a tiny free margin around the cuticle. Cap the free the edge to prevent shrinkage.
Step 3: Cure for 30 seconds in the OPI LED Light.
Step 4: Shake GelColor vigorously for 1 minute to thoroughly mix. Wipe excess color from the stem and brush when removing from the bottle.
Step 5: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle (coverage may look sheer). Cap the free edge to prevent shrinkage.
Step 6: Cure 30 seconds in the LED Light. Step 7: Apply a second coat of GelColor to the nail following the same process. The second coat will provide true color and full coverage.
Step 8: Cure 30 seconds in the LED Light.
Step 9: Shake GelColor Top Coat vigorously for 1 minute to thoroughly mix. Wipe excess Top Coat from the stem and brush when removing from the bottle.
Step 10: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle. Cap the free edges to seal in color.
Step 11: Cure 30 seconds in the LED Light.
Step 12: Remove gel residue with Expert Touch Nail Wipe saturated with N.A.S. 99.
Step 13: Apply a drop of Avoplex Nail and Cuticle Replenishing Oil and massage into cuticles.
Step 2: Apply a thin coat down the center of the nail and then to each side leaving a tiny free margin around the cuticle. Cap the free the edge to prevent shrinkage.
Step 3: Cure for 30 seconds in the OPI LED Light.
Step 4: Shake GelColor vigorously for 1 minute to thoroughly mix. Wipe excess color from the stem and brush when removing from the bottle.
Step 5: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle (coverage may look sheer). Cap the free edge to prevent shrinkage.
Step 6: Cure 30 seconds in the LED Light. Step 7: Apply a second coat of GelColor to the nail following the same process. The second coat will provide true color and full coverage.
Step 8: Cure 30 seconds in the LED Light.
Step 9: Shake GelColor Top Coat vigorously for 1 minute to thoroughly mix. Wipe excess Top Coat from the stem and brush when removing from the bottle.
Step 10: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle. Cap the free edges to seal in color.
Step 11: Cure 30 seconds in the LED Light.
Step 12: Remove gel residue with Expert Touch Nail Wipe saturated with N.A.S. 99.
Step 13: Apply a drop of Avoplex Nail and Cuticle Replenishing Oil and massage into cuticles.
Di-Hema Trimethylhexyl Dicarbarmate, Butyl Acetate, Hydroxyethyl Merthacrylate (Hema), Ethyl Acetate, Hydroxypropyl Methacrylate, Nitrocellulose, Isopropyl Alcohol, Adipid
Acid/neopentyl/Glycol/Trimelltic Anhydride Copolymer/Hydroxycyclohexyl Phenyl Ketone, Acetyl Tributyl Citrate, Tosylamide/Epoxy Resin, Stearalkonium Bentonite, Benzophenone-1, Trimethylpentanediyl Dibenzoate, Polyvinyl Butyral
May Also Contain: Mica, CI 77891 (Titanium Dioxide), CI 75470 (Carmine), Calcium Aluminum Borosilicate, Tin Oxide, Silica, Red 6 (CI 15850), Red 7 (C1 15850), CI 60725 (Violet 2), CI 77491 (Iron Oxides), CI 77492 (Iron Oxides), CI 77499 (Iron Oxides), CI 73360 (Red 30), CI 45410 (Red 27), CI 77120 (Barium Sulfate), CI 77007 (Ultramarines), CI 19140 (Yellow 5), CI 77163 (Bismuth Oxychloride), CI 77742 (Manganese Violet), CI 77510 (Ferric Ferrocyanide), CI 42090 (Blue 1), CI 17200 (Red 33), CI 77000 (Aluminum Powder)
Step 1: Shake OPI GelColor Base Coat vigorously for 1 minute to thoroughly mix. Wipe excess Base Coat from the stem and brush when removing from the bottle.
Step 2: Apply a thin coat down the center of the nail and then to each side leaving a tiny free margin around the cuticle. Cap the free the edge to prevent shrinkage.
Step 3: Cure for 30 seconds in the OPI LED Light.
Step 4: Shake GelColor vigorously for 1 minute to thoroughly mix. Wipe excess color from the stem and brush when removing from the bottle.
Step 5: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle (coverage may look sheer). Cap the free edge to prevent shrinkage.
Step 6: Cure 30 seconds in the LED Light. Step 7: Apply a second coat of GelColor to the nail following the same process. The second coat will provide true color and full coverage.
Step 8: Cure 30 seconds in the LED Light.
Step 9: Shake GelColor Top Coat vigorously for 1 minute to thoroughly mix. Wipe excess Top Coat from the stem and brush when removing from the bottle.
Step 10: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle. Cap the free edges to seal in color.
Step 11: Cure 30 seconds in the LED Light.
Step 12: Remove gel residue with Expert Touch Nail Wipe saturated with N.A.S. 99.
Step 13: Apply a drop of Avoplex Nail and Cuticle Replenishing Oil and massage into cuticles.
Step 2: Apply a thin coat down the center of the nail and then to each side leaving a tiny free margin around the cuticle. Cap the free the edge to prevent shrinkage.
Step 3: Cure for 30 seconds in the OPI LED Light.
Step 4: Shake GelColor vigorously for 1 minute to thoroughly mix. Wipe excess color from the stem and brush when removing from the bottle.
Step 5: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle (coverage may look sheer). Cap the free edge to prevent shrinkage.
Step 6: Cure 30 seconds in the LED Light. Step 7: Apply a second coat of GelColor to the nail following the same process. The second coat will provide true color and full coverage.
Step 8: Cure 30 seconds in the LED Light.
Step 9: Shake GelColor Top Coat vigorously for 1 minute to thoroughly mix. Wipe excess Top Coat from the stem and brush when removing from the bottle.
Step 10: Apply a very thin coat to the nail leaving a tiny free margin around the cuticle. Cap the free edges to seal in color.
Step 11: Cure 30 seconds in the LED Light.
Step 12: Remove gel residue with Expert Touch Nail Wipe saturated with N.A.S. 99.
Step 13: Apply a drop of Avoplex Nail and Cuticle Replenishing Oil and massage into cuticles.
Di-Hema Trimethylhexyl Dicarbarmate, Butyl Acetate, Hydroxyethyl Merthacrylate (Hema), Ethyl Acetate, Hydroxypropyl Methacrylate, Nitrocellulose, Isopropyl Alcohol, Adipid
Acid/neopentyl/Glycol/Trimelltic Anhydride Copolymer/Hydroxycyclohexyl Phenyl Ketone, Acetyl Tributyl Citrate, Tosylamide/Epoxy Resin, Stearalkonium Bentonite, Benzophenone-1, Trimethylpentanediyl Dibenzoate, Polyvinyl Butyral
May Also Contain: Mica, CI 77891 (Titanium Dioxide), CI 75470 (Carmine), Calcium Aluminum Borosilicate, Tin Oxide, Silica, Red 6 (CI 15850), Red 7 (C1 15850), CI 60725 (Violet 2), CI 77491 (Iron Oxides), CI 77492 (Iron Oxides), CI 77499 (Iron Oxides), CI 73360 (Red 30), CI 45410 (Red 27), CI 77120 (Barium Sulfate), CI 77007 (Ultramarines), CI 19140 (Yellow 5), CI 77163 (Bismuth Oxychloride), CI 77742 (Manganese Violet), CI 77510 (Ferric Ferrocyanide), CI 42090 (Blue 1), CI 17200 (Red 33), CI 77000 (Aluminum Powder)