Wella Professionals introduces Blondorplex. The Blondor you love, now pre-mixed with the active ingredient in Wellaplex No1 (malic acid).

For the first time, Blondor lightening powder includes Bond Building Technology. Bond builders help to reconstruct inner hair bonds during lightening or color services. Bond stabilizers further strengthen hair bonds and rebalances the PH factor.With an easy preparation and up to 97% less breakage* with the same lifting performance, Blondorplex is the perfect partner for premium lightening services. Always complete a Blondorplex service with WellaPlex N02 Bond Stabilizer.

*When using Wellaplex N°2 with Blondorplex, versus Blondorplex alone

Preparation:

1. Depending on the desired degree of lightening and consistency, mix BlondorPlex powder with Wella Professionals developer in a ratio of 1:1.5 up to 1:2 in a non-metallic bowl. The lower the concentration of developer the gentler the lightening process. If there is contact with the scalp (root application) use 6% as a maximum. 

For both on and off-scalp applications: 

1. Apply the lightener evenly to unwashed hair where desired lift is required.
2. Develop until desired lightening in achieved. No heat. The development time depends on the condition of the hair and the desired blonde result. Carefully check the hair every 5 – 10 minutes during the process. Do not proceed further if adverse reaction occurs (e.g. itching, burning or rash or any unexpected reaction). Stop and immediately rinse with lukewarm water. The maximum total development time is 50 minutes.
3. After desired lift is achieved, rinse thoroughly.
4. Apply Wellaplex No2.
5. After 10 minutes, rinse and follow with Blondor Seal & Care. 

POTASSIUM PERSULFATE, SODIUM SILICATE, AMMONIUM PERSULFATE, MAGNESIUM CARBONATE HYDROXIDE, SODIUM STEARATE, PARAFFINUM LIQUIDUM/ MINERAL OIL/ HUILE MINERALE, XANTHAN GUM, ALGIN, DISODIUM EDTA, MALIC ACID, SILICA, AQUA/WATER/EAU, ULTRAMARINES (CI 77007)